Configuration file of ZBProxy

At the first launch of ZBProxy, it is going to generate a configuration file automatically.

Also, if configuration file not exist, the program will generated a new one.

配置文件会在第一次启动 ZBProxy 时自动生成。如果配置文件不存在，程序也会自动生成一个新的。

Configuration file, which is called ZBProxy.json, is used to set all options to unlock the power of ZBProxy.

ZBProxy 的配置文件是ZBProxy.json，配置文件用于设置所有的选项以完全释放 ZBProxy 的强大力量。

The full config is looked like this: (ZBProxy 3.0-rc.4+)

{
    "Services": [
        {
            "Name": "HypixelDefault",
            "TargetAddress": "mc.hypixel.net",
            "TargetPort": 25565,
            "Listen": 25565,
            "Flow": "auto",
            "IPAccess": {
                "Mode": "",
                "ListTags": []
            },
            "Minecraft": {
                "EnableHostnameRewrite": true,
                "RewrittenHostname": "",
                "OnlineCount": {
                    "Max": 114514,
                    "Online": -1,
                    "EnableMaxLimit": false
                },
                "IgnoreFMLSuffix": false,
                "HostnameAccess": {
                    "Mode": "",
                    "ListTags": []
                },
                "NameAccess": {
                    "Mode": "",
                    "ListTags": []
                },
                "EnableAnyDest": false,
                "AnyDestSettings": {},
                "PingMode": "",
                "MotdFavicon": "{DEFAULT_MOTD}",
                "MotdDescription": "§d{NAME}§e service is working on §a§o{INFO}§r\n§c§lProxy for §6§n{HOST}:{PORT}§r"
            },
            "TLSSniffing": {
                "RejectNonTLS": false,
                "RejectIfNonMatch": false,
                "SNIAllowListTags": []
            },
            "SocketOptions": {
                "Mark": 0,
                "Interface": "",
                "TCPFastOpen": false,
                "TCPCongestion": "",
                "MultiPathTCP": false
            },
            "Outbound": {
                "Type": "",
                "Network": "tcp",
                "Address": ""
            }
        }
    ],
    "Lists": {}
}

This file consists of a JSON that currently has Services item and Lists item.

该文件由含有 Services项 和 Lists项 的JSON组成。

JSON Item Type Meaning
Services []ConfigProxyService (List of ProxyService Object) You can setup multiple services there. All services that correctly configured in this list will all be launched when the program start.

你可以在此设置多组服务，每组被正确配置的服务都将在主程序启动时运行。
Lists []Lists (list of key-value string lists) Definition for lists that currently used for Access Control.

定义用于 访问控制 的列表。

[!TIP] A ZBProxy instance can run multiple services in parallel, depending on the number of Service objects you configure. 一个 ZBProxy 实例可以并行运行多个服务，取决于你配置的 Service 对象数量。

ProxyService Object

Only the first five options are required.

仅前五个选项是必须的。

When only the first five options are included in a Service configuration, ZBProxy will start a ordinary and efficient reverse proxy.

当一个服务配置里只包含前五个选项时，ZBProxy 将启动一个普通且高效的反向代理。

Name (Requied) : string

The name of the service which is used to be shown in the log or MOTD {NAME} tag.

该服务的名字，用于在日志中显示或作为MOTD中的{NAME}占位符。

TargetAddress (Requied) : string

The address you want to proxy. (without port)

你想要代理的地址，不包括端口号。

TargetPort (Required) : uint8 (unsigned short)

The port of the address you want to proxy. (from 0 to 65535)

你想要代理的端口，范围在0到65535。

Listen (Required) : uint8 (unsigned short)

The port you want to listen on 0.0.0.0. (from 0 to 65535)

你想要监听的本地端口，默认在0.0.0.0上监听，范围在0到65535。

Flow (Required) : "auto" | "linux-zerocopy" | "multiple" | "origin"

For more information, go to Flow page.

选择的流控模式，可选项如上，保持默认即可。

更多有关流控模式的信息，前往 流控 页。

IPAccess : AccessControl Object

Access control module for restricting client IP access.

For more information, go to AccessControl page.

用于控制客户端IP访问的 访问控制 模块。

详见 访问控制 页。

Minecraft : Minecraft Object

Go to Minecraft page.

详见 Minecraft 页。

TLSSniffing : TLSSniffing Object

Go to TLS page.

详见 TLS 页。

SocketOptions : SocketOptions Object

See below.

Outbound : Outbound Object

See below.

SocketOptions Object

Mark : int

Set routing mark for outbound connections if not zero.

Supported on Linux (SO_MARK) and FreeBSD (SO_USER_COOKIE).

不为 0 时为出站连接设置路由标记。

支持 Linux (SO_MARK) 和 FreeBSD (SO_USER_COOKIE)。

Interface : string

Bind outbound connections to the specified NIC if not empty.

Supported on Linux.

不为空时将出站连接绑定到指定网卡。

支持 Linux。

TCPFastOpen : boolean

Enable TCP fast open support for outbound connections.

为出站连接启用 TCP 快速打开 支持。

TCPCongestion : string

Specify TCP congestion control algorithm for outbound connections.

Supported on Linux. Needs kernel (module) support for specific algorithms.

指定出站连接的 TCP 拥塞控制算法。

支持 Linux。需要内核（模块）支持特定算法。

MultiPathTCP : boolean

Enable Multipath TCP support for outbound connections.

为出站连接启用 多路径 TCP 支持。

Outbound Object

Type : string (Outbound type)

Outbound type for remote connections. Available options are:

用于远程连接的出站类型。可用的选项有：

Network (Requied) : string (network type)

Network type for remote connections. Available options are:

用于远程连接的网络类型。可用的选项有：

  • "tcp". Dual stack IPv4/IPv6 dial with RFC6555 Happy Eyeballs support (by Go standard library).
  • "tcp4". IPv4 only.
  • "tcp6". IPv6 only.

Address : string

The address of your outbound server (if Type is not empty), in host:port format.

For example, "localhost:1080".

出站服务器的地址（如果 Type 不为空），主机名:端口 格式。

例如，"localhost:1080".

[!NOTE]

IPv6 addresses here should be wrapped with square brackets. For example, "[::1]:1080". 此处的 IPv6 地址应使用方括号包裹。例如 "[::1]:1080".

results matching ""

    No results matching ""